<img height="1" width="1" style="display:none;" alt="" src="https://px.ads.linkedin.com/collect/?pid=1448210&amp;fmt=gif">
5G RedCap and eRedCap for the IoT: The Cost Challenge Slowing the LTE Sunset

5G RedCap and eRedCap for the IoT: The Cost Challenge Slowing the LTE Sunset

November 17, 2026
5G RedCap and eRedCap for the IoT: The Cost Challenge Slowing the LTE Sunset
8:23

Key Insights

  • Despite the shift to 5G Standalone (SA), 5G RedCap will stall if the IoT market stays tethered to LTE. Most cellular IoT gateways and routers still rely on lower-cost LTE-based standards that already meet their customers’ operational needs.
  • 5G RedCap and eRedCap are the clearest path to bringing the IoT into the 5G era. They allow for lower device complexity, at a lower cost than full 5G; providing future proofing, and the 5G-only advantages of network slicing if needed.
  • Cost remains a big barrier to 5G RedCap adoption. 5G RedCap is cheaper than full 5G, but it still needs to move much closer to LTE pricing before it can scale across enterprise IoT.
  • 5G RedCap and eRedCap networks will be critical to the successful sunset of LTE. They are needed to take over the bulk of LTE-based IoT connections. But they, in turn, will be stunted as long as LTE persists. 5G RedCap and eRedCap’s success will depend on volume sales, pricing elasticity, and chipsets built specifically for the IoT rather than consumer-grade derivatives.

The successful transition from Long Term Evolution (LTE) to 5G requires more than just core network modernization. The telecommunications industry must also confront a stubborn reality: that much of today’s Internet of Things (IoT) ecosystem remains deeply wedded to LTE, due to low costs and easy access.

ABI Research sees 5G Reduced Capability (RedCap) and Enhanced RedCap (eRedCap) as the only viable paths to sunsetting LTE in the IoT market. But while many carriers are deploying 5G Standalone (SA), fewer are rolling out 5G RedCap Radio Access Network (RAN) upgrades. Plus, high chipset costs and a distant sunset horizon for LTE in most countries continue to hold back mass adoption.

 

Why IoT Customers Aren't Ready to Say Goodbye to LTE

The transition from Non-Standalone (NSA) mobile networks to Standalone (SA) networks has been underway since 2020, truly gaining momentum in 2022. Wireless carriers aim to make their core networks more efficient and less expensive to run, and to reallocate LTE spectrum for 5G. However, the IoT served by its modules, gateways, and routers remains a major obstacle to fully migrating to 5G.

LTE Cat-1/bis and Cat-4 are already sufficient for most higher bandwidth IoT applications today. For example, ABI Research forecasts that 40% of cellular IoT modules shipped in 2026 will use an LTE Cat-1 variant. These LTE standards are long established and highly commoditized, so they are low-cost and widely supported, and notably stubborn in Europe, where there is extensive country and carrier fragmentation. Given this, a key question comes to mind: why would IoT customers pay more for non-essential capabilities? In a market that is literally defined by efficiency, they wouldn’t.

Embracing 5G RedCap and the subsequent eRedCap is the only way for wireless carriers and IoT device vendors to shift the IoT away from LTE. Compared to traditional 5G, 5G RedCap is more cost-effective, and this difference is driven by the following:

  • A simpler radio design
  • A simpler antenna array
  • Less Random-Access Memory (RAM)
  • Reduced power requirements

The result? LTE-equivalent throughput rates, with comparable 5G latencies, at roughly less than half the price of full 5G. Although, for the time being, the price is still higher than the LTE it is intended to replace and act as a migratory path for. While this is as big a problem for Mobile Broadband (MBB), Fixed Wireless Access (FWA), and smartwatches, it is for enterprise IoT.

 

Takeaway: 5G RedCap and eRedCap are a right-sized version of 5G, better tailored for the less-demanding, lower-power IoT use cases.

 

 

Table 1: 5G Versus 5G RedCap for IoT

Category

Traditional 5G

5G RedCap/eRedCap

Market positioning

Premium cellular connectivity

Affordable 5G alternative for IoT

Performance

Full 5G throughput and capabilities

Reduced throughput with comparable latency

Cost structure

Complex hardware drives up device prices

Simpler components reduce costs by 50% or more

Commercial viability

Cost limits adoption in price-sensitive IoT verticals

Adoption depends on further price reductions

Use cases

Bandwidth-intensive mobile applications

Low-cost gateway and router use cases

Role in LTE sunset

Cannot economically replace all LTE devices

Enables migration, with eRedCap targeting LTE Cat-1/bis

(Source: ABI Research)

 

 

Cutting 5G RedCap Costs in Half Still Isn't Enough

5G RedCap and eRedCap-enabled gateways and routers will inevitably replace LTE for cellular networking in the IoT. How quickly that happens depends on how quickly component costs are lowered further. And it depends on better 5G RedCap support from wireless carriers, with national and international coverage that should match at least that of full 5G, even if not yet LTE.

5G RedCap hardware components are at least half the price of 5G. But 5G RedCap remains prohibitively expensive for widespread enterprise adoption as IoT customers are accustomed to even lower prices. Achieving price parity with LTE will be the real litmus test for RedCap's commercial viability. This will only happen with volume, which will only happen with network support, and clear timelines for LTE sunsets.

Chipset innovation plays an essential role in minimizing the cost of 5G RedCap and eRedCap products. Current first-generation 5G RedCap chipsets are built for low cost MBB, FWA, and wearables. Their designs are cut-down versions of the first wave of consumer mobile broadband 5G chips. But the consumer-focused semiconductor companies Qualcomm, MediaTek, UNISOC, and Huawei won’t iterate their chipsets until current models sell in high enough volumes to prove the viability of the product line.

By contrast, first-generation eRedCap chipsets will be built from the ground up to match the exacting performance requirements and cost-sensitivity of IoT devices. Notable IoT specialists already committed to launching eRedCap chipsets are Sequans, Altair Semiconductor, and Nordic Semiconductor.

 

Four Market Realities That Will Shape 5G RedCap's Future

ABI Research makes several observations going forward:

    • 5G RedCap adoption will take time. The United States and China offer the earliest commercial opportunities thanks to the earliest widespread network support. Initial demand will come from IoT applications that value long device life spans and 5G features over cost minimization.
    • Network slicing could give 5G RedCap an early advantage. Dedicated 5G slices for first responders make RedCap particularly attractive for public safety applications. Emergency service providers can benefit from improved cellular capabilities without needing to pay for full 5G.
    • eRedCap is integral to the eventual shutdown of LTE networks. It offers an (eventual) cost-effective 5G replacement for the widely used LTE Cat-1/bis technology. Chipsets could begin sampling in late 2026, but eRedCap devices are unlikely to be deployed before 2028/2029.
    • eRedCap risks being over-commoditized from day one. ABI Research has determined that eRedCap must compete with the much lower prices of LTE Cat-1/bis. To do this, vendors will need high shipment volumes early on to gain market share. This means potentially sacrificing profit margins for the sake of breaking down adoption barriers. It’s possible that RedCap may never be a significant profit engine, but rather a necessary means of evolving from 4G to 5G.

The bottom line is that there is no complete 5G transition until the IoT conundrum is solved. RedCap and eRedCap offer the only affordable path to widespread 5G adoption across cellular IoT gateways and routers. Without these low-cost connectivity technologies, billions of devices will risk going out of commission.

 

Related Research:

 

Tags: IoT Hardware


Jamie Moss

Written by Jamie Moss

Research Director
Jamie Moss, ABI Research’s Research Director for IoT Hardware, covers Machine-to-Machine (M2M), Internet of Things (IoT), and Internet of Everything (IoE) technologies. Jamie conducts competitive analysis, data modelling, and develops analytical tools for information products and services in the machine-type connectivity market.

FREE RESEARCH

Stay Ahead of Technology Trends With Free Research

You May Also Like

Key Insights: Enterprise AI adoption faces mounting friction from both a trust deficit and bill shock, prompting the need for AI guardrails and edge Financial Operations (FinOps). Stream Analyze ...

Will Wong Will Wong

Global edge Artificial Intelligence of Things (AIoT) chipset revenue is forecast to more than triple between 2025 and 2031, driven primarily by inference workloads. Capturing a strong share in this ...

Will Wong Will Wong